5.0 mm Red Stopdrop Tool Lanyard Cable With Stainless Locking Hooks
|
1.Diameter
|
inner wire dia: 1.0mm,1.2mm or other
outer coil dia: 6.0mm, 5.0mm, 4.0mm etc
|
Custom-made available
|
|
2.construction
|
7X7,7*19,1*19,etc
|
|
3.material
|
stainless steel or galvanized steel or other
|
|
4.MOQ
|
500pcs
|
| 5.length |
stregthlength can be 120-180cm or as requirement |
| 6.diameter of coil |
30-50mm or as requirement |
| 7.coating
|
PVC,PU,PE,nylon,etc
|
|
8.end parts of fittings
|
stainless locking carabiners
or as required
|
|
9.Lead time
|
7days if there were enough material in stock
|
|
10.sample
|
Free sample available if all of dimensions same as our existing one ,if not
contact me ,to get a cost efficient solution.
|
|
application
|
1.The products are used to attached hand tools to user while they are working
at height.
The intent of the lanyard is to ensure that a tool will not drop and injure
someone working or standing below the work zone .
such as window cleaning and working at heights
2.Tool Safety Lanyard for Scaffolding Scaffolders Tools and other tools
such as Tactic use
3.For small diameter coil tool lanayrd ,they can be used in the kayal, canoe
boats ,etc or used in hiking to protect from losing goods or to fasten goods
to your pocket ,it is very conventient .
|
| advatage |
1.high tension
2.long life cycle with plastic usually PU coating
3.smooth surface with plastic covering
4.when not at working ,it can be return to coil condition itself
5.Coil design reduces length, prevents snag and tangle, hazards.
6.Constructed with PU covered aircraft steel cable for ultimate strength and durability
|
Tool lanyard selection :
1. Tool and lanyard selection needs to be carefully considered to ensure operator safety and comfort.
2. In addition to our wide range of standard lanyards, we will manufacture special lanyards for specific applications.
3. Tools lanyards are fitted with lockable screwgate hooks at each end. Hooks are permanently attached to the lanyard material and so cannot be accidently detached.
4. Tools up to 5lbs (2.3kg) may be attached by lanyard to the operator but a lower limit may be preferable for operator comfort, safety and ease of operation.
Quality :
For the qulity control , our test is supposed to pass 3 times using your required weight load in the vertical drop ,the crimp cannot pull-out ,and rope not broken after tested.
Our spiral lanyard was especial produced and have advanced technology and We've been in this products for more than 8years ,and have many regular customer in USA , prime quanlity!
how to choose material:1stain1.1.1.
1.stainless steel :
providing good corrosion resistance and strength comparable to galvanized carbon steel grades.
2.galvanized steel:
Zinc coated carbon steel offers some corrosion resistance. It remains ductile over long periods of working. Usually higher break strengths than stainless steels.
FAQ:
Q:How do you control the quality?
A: 100% of the products will be tested and test its quality reliability ,
from raw material to half assembling until finishing products,
Each product should pass all these QC procedures before shipping to customer.
Q: What is your trading and payment terms?
A:
1. Payment term: T/T 30% deposit after order confirmed, 70% balance before shipment or paypal for small amount .
2. Lead time : normally 15-25days after deposit received.
3. Sample policy : Samples are always available for each model . Samples can be ready in 3-10 days once payment received .
4. Shipping port: Shenzhen/Guangzhou China
5. Discounts : We offer discount for big quantity.
Q: How I can delivery the my goods?
A:
1,By Express: such as DHL, UPS, TNT, FEDEX etc. The dispatch time is about 3-5 days
2,Sea Freight: we will update sea freight once we know your sea port where goods will be
delivered.
3,Agent designated by client: please tell us the contact detail of your shipping agent and
we will arrange to deliver the items
package :
Your message must be between 20-3,000 characters!
